Describe the job in plain English. CompliAI drafts your hazard register, SWMS and PPE, then exports a clean, branded SSSP — ready to hand to the main contractor.
No templates to wrestle, no blank page. You describe the work; the AI does the first draft of the safety thinking.
Write what you're doing, the gear you'll use, and what's around you — in plain English.
CompliAI builds a hazard register, a safe work method statement and a PPE list tailored to the job.
Check every line against your real site, add your details, and export a branded SSSP PDF.
Everything a main contractor asks a subbie to hand in — plus optional sections for site rules, incident reporting and toolbox talks. Add only what the job needs; it all exports as one PDF.
Site hazards with the risk each creates and the controls to manage it.
The job broken into steps, with hazards and controls for each one.
Tap the gear that's mandatory on site; it prints into the plan.
Register your gear with its inspection and electrical test-and-tag status (AS/NZS 3760).
LPG, fuels and chemicals with their controls and whether a Safety Data Sheet is held.
The tickets the job needs — EWP, scaffolding, hot work, first aid — with expiry dates.
Who's on site, plus high-risk and notifiable works that need a permit or WorkSafe notice.
Signature lines so the crew confirm they've been briefed before work starts.
Create a free account to save up to 3 active jobs — no card needed. Your plan and registers stay in one place, on any device, ready to update next time you're on that site.
The hazard and method drafts adapt to the work you describe.
A Site-Specific Safety Plan (SSSP) is a document that sets out how the health and safety risks of one particular job or site will be managed. It pulls together the hazards on that site, the controls for them, the safe method for the work, the PPE required, and who's responsible — so everyone arriving on site knows how the job will be run safely.
Not as a named form. Under the Health and Safety at Work Act 2015, every business (a "PCBU") has a duty to manage its work risks so far as is reasonably practicable. An SSSP isn't written into the Act by name — but it's the standard, widely recognised way to demonstrate you're meeting that duty, and main contractors and principals almost always require one contractually before they'll let you start on site. In practice, no SSSP often means no job.
An SSSP is the whole-of-site plan. A Safe Work Method Statement (SWMS), sometimes called a job safety analysis or task analysis, zooms in on a single task and breaks it into steps, listing the hazards and controls for each. A good SSSP usually contains one or more SWMS for the higher-risk parts of the work. CompliAI drafts both.
The clue is in the name. A generic template that could describe any site is exactly what principals are trying to avoid. A real SSSP names the actual hazards on this site — the power lines on that boundary, the occupied house next door, the gas bottles in that corner. That's the part CompliAI speeds up: you describe the real site, and the draft reflects it, instead of you starting from a blank or generic template.
General guidance only, not legal advice. Always check current requirements with WorkSafe New Zealand and your principal contractor, and review every plan against your actual site.
Yes — you can build and export an SSSP for free, no account needed. Create a free account to save up to 3 active jobs. Paid plans remove the small CompliAI footer, add your own logo, lift the job limit, and save your company details so you don't re-type them every job.
No, and this matters: CompliAI drafts a starting point. You must review every line against your actual site, gear and crew, adapt it, and brief your team. You remain responsible for the final plan — it's a tool to speed up your thinking, not a replacement for it.
A few minutes. Describe the job, let the AI draft the hazard register, SWMS and PPE, review and tidy it, then export the PDF.
Yes, on a paid plan. The free version exports a clean plan with a small CompliAI footer; upgrading removes it and adds your branding.
Site and project details, a hazard register, a Safe Work Method Statement, PPE, key personnel and emergency procedures, and a crew sign-off sheet — plus optional sections for plant & equipment, electrical test & tag, hazardous substances (SDS), site rules & induction, training & competencies, subcontractors & notifiable works, incident reporting and toolbox talks. Add only what the job needs; it all exports as one PDF.
Yes. CompliAI runs in the browser and works on a phone, so you can build or tweak a plan from the ute.
Build and export free, no account needed. Create a free account to save up to 3 jobs. Paid plans remove the footer, add your logo, and scale up.
Describe the job, let CompliAI draft it, and walk onto site with the paperwork sorted.
Build your SSSP free →